9V and  USB power converters for Eurorack

9V and USB power converters for Eurorack

12V and 9V Eurorack Power Converters

As addition to the DSQ-1 and DR20 the two power converters connect the devices to the 12V Eurorack power supply. It abolishes batteries or external power supplies which are usually used to power the devices.

Easy Connection

USB power converter

Just connect the Eurorack connector to the Eurorack power supply and plug in the USB cable from the Korg SQ-1 (or any other USB powered device)

9V power converter

Disconnect the cables from the RE-20 battery holder and solder them onto the small PCB. (Pay attention to the correct polarity) Although pre-configured to 9V, the converter power can be freely adjusted for other devices to any voltage below 12V.

Zurück zum Blog

Hinterlasse einen Kommentar

Bitte beachte, dass Kommentare vor der Veröffentlichung freigegeben werden müssen.