After releasing the first 4 3D printed cases for the TE Pocket Operators from Teenage Engineering, I've created another case for the PO-20 Arcade. The case features a clear window on the side where the lights of the Pocket Operator shines through as well as Arcade styled round buttons.Top part of the enclosure
Bottom part of the enclosure
All cases include now 2 caps for the encoders.
As always, only high quality Prusament PLA from Prusa and Filamentum is used for printing the cases.
Print your own Pocket Operator Case
If you own a 3D printer or have access to one, you can download the STL file(s) in the STL file section and print the case(s) by yourself. By designing the case, I tried to avoid support material where possible. The downloads contain all required stl files to print the parts of the case. The print bed layout as well as some more print tips are shown on the download page.
In order to allow the print on normal 3D printers without multimaterial or multitool setup, the top panel is printed separate. The two colours are easy to realise with pausing the print and changing the filament manually.
New soft button colours
All 3D printed cases are in addition to black now available with 2 new soft button colors natural white and red.