DSQ-1 - Korg SQ-1 Sequencer Eurorack Mounting Frame

DSQ-1 - Korg SQ-1 Sequencer Eurorack Mounting Frame

The DSQ-1 is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. 

For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required.

Easy assembly

  1. Remove the batteries
  2. Loosen the thin plastic film on one side which is holding the battery holder in place
  3. Unscrew the 4 front screws
  4. Remove the back and pull the battery holder through the back, that the back can be put aside
  5. Slide the mounting frame in 
  6. Use the 4 screws from the front to fix the mounting frame




Korg SQ-1 Eurorack Frame with white knobs mod
Korg SQ-1 Eurorack Frame with white knobs mod

DSQ-1 Korg SQ-1 Eurorack Mount
DSQ-1 Korg SQ-1 Eurorack Mount
DSQ-1 Korg SQ-1 Eurorack Mount
DSQ-1 Korg SQ-1 Eurorack Mount
Zurück zum Blog

Hinterlasse einen Kommentar

Bitte beachte, dass Kommentare vor der Veröffentlichung freigegeben werden müssen.