DSQ-1 PLUS - Korg SQ-1 Sequencer Eurorack Mounting Frame with 4 HP Module space

DSQ-1 PLUS - Korg SQ-1 Sequencer Eurorack Mounting Frame with 4 HP Module space

The DSQ-1+ is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. While the DSQ-1 mounting frame offers bigger lettering, the DSQ-1+ uses this area to provide space for a 4HP Eurorack Module.  

For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required.

Easy assembly

  1. Remove the batteries
  2. Loosen the thin plastic film on one side which is holding the battery holder in place
  3. Unscrew the 4 front screws
  4. Remove the back and pull the battery holder through the back, that the back can be put aside
  5. Slide the mounting frame in 
  6. Use the 4 screws from the front to fix the mounting frame
SQ-1 Plus Eurorack Mounting Frame for Korg SQ-1
SQ-1 Plus Eurorack Mounting Frame for Korg SQ-1
SQ-1 Plus Eurorack Mounting Frame for Korg SQ-1
SQ-1 Plus Eurorack Mounting Frame for Korg SQ-1
SQ-1 Plus Eurorack Mounting Frame for Korg SQ-1
SQ-1 Plus Eurorack Mounting Frame for Korg SQ-1

Powering the SQ-1 can either be done by batteries, via USB with an angled USB cable or with the 12V to USB power converter.

Zurück zum Blog

Hinterlasse einen Kommentar

Bitte beachte, dass Kommentare vor der Veröffentlichung freigegeben werden müssen.