After some weeks of development and a waste bin full of failed attemps and prototypes, another 3D printed case for the Teenage Operators is ready to be released:
The LIVE PRO
What took so long to develop this case?
1. The buttons
The buttons are a new design. It took lots and lots of test prints to get them fit properly into the case with not too much play but also not with too less. It's a challange to find the sweet spot between too much or too less play, especially with two 3D printed parts where the 3D print layers work against a smooth fit.
Completly new is that the buttons are printed with two different materials. While the lower part is printed with translucent clear PLA, the upper part is printed with soft flexible material (Filatech FilaFlexible40). The translucent part ensures that the light of the sequencer buttons gleam through, while the rubbery part on the top ensures a nice play feel.
Alternativley, the buttons are also in fully translucent available, without the rubber part on the top or with letters (side buttons only).
2. The Top of the Pocket Operator Case
While most of the other 3D printed cases in the shop have a glued-in top plate, the top plate of the LIVE PrO is printed up-side-down in one part together with the middle part of the case on a structured surface. This does not only provide a nice finish of the top surface, but also adds rigidity to the case.
Additionally, the top part is about 3 times thicker to provide better guidiance to the buttons and stability to the case. The frame with the logo ist the only part of the upper case which is glued into place.
3. PETG for the upper part of the case
Originally I planend to use PLA for printing the case since it's harder and better suitable for tighter tolerances. However, Prusament PETG is a bit more flexible and not a brittle material like PLA. It withstands UV light much better than PLA which makes it the perfect material for a rigid case which can be used on stage and/or a rougher environment.
Below are some impressions of the new LIVE PrO case
The case can be purchased in different configurations in the online shop.