About The SP1 Eurorack Modular Case
Why to be limited to modules when it comes to a flexible modular system? Why not also to be flexible with the casing? The SP1 grows with your needs. From the small to-go modular drum synthesiser setup up to the fully fledged modular home system...or even combine a stationary system with a mobile system. The SP1 can be extended vertically as well as horizontally.
Features of the SP1 Eurorack Modular Case
- Flexible modular case design
- 3D printed and use of standard Eurorack thread profiles
- Horizontally extendable
- Vertical extendable
- Build in cable shaft on the back (shaft is accessible with the modules SP1H10CC or SP1 H10DCC)
- light weight
- Good cost/performance ratio
- Horizontal or angled desktop position*
- 70mm module depth
Current available SP1 Eurorack case modules:
- SP1H10 - Standard 10HP 3U Eurorack modules
- SP1H35 - Standard 35 HP 3U Eurorack Module (only STL file download)
- SP1H10VC - Standard 10 HP 3U Eurorack Module with vertical connection and cable holes
- SP1H10HC – Standard 10 HP 3U Eurorack Module for vertical connection and back pillar
- SP1H10RC - 10 HP 3U Eurorack Module with right cover
- SP1H10LC - 10 HP 3U Eurorack Module with left cover
- SP1H25GM - 25HP 3U Eurorack Module with Grip
- SP1H10CC - Standard 10 HP 3U Eurorack Module with cable opening into the cable shaft
- SP1H10DCC - Standard 10 HP 3U Eurorack Module with double cable opening
- SP1Cap10 - 10 HP front cap
- SP1Cap25 - 25 HP front cap
- SP1CapRC - 10 HP front cap with right cover
- SP1CapLC - 10 HP front cap with left cover
Planned case modules:
- SP1SQ1 - Eurorack Module for Korg™ SQ1
- Sp1TEO - Eurorack Module for Teenage Engineering™ Operator Series
- SP1H10FL - Standard 10 HP 3U Eurorack Module with flat back for horizontal positioning
- SP1H10VCFL - Standard 10 HP 3U Eurorack Module with vertical connection and cable holes with flat back for horizontal positioning
- SP1H10RCFL - 10 HP 3U Eurorack Module with right cover with flat back for horizontal positioning
- SP1H10LCFL - 10 HP 3U Eurorack Module with left cover with flat back for horizontal positioning
- SP1H10CCFL - Standard 10 HP 3U Eurorack Module with cable opening into the cable shaft with flat back for horizontal positioning
- SP1H10DCCFL - Standard 10 HP 3U Eurorack Module with double cable opening with flat back for horizontal positioning
Available as STL Files for your own Eurorack prints.
*desktop position for one horizontal row systems only




















