A 3D printed case for 2 Teenage Engineering Pocket Operators. The top of the case is printed with high quality Prusament PETG and the bottom with Extrudr PLA.
The lower part of the case is printed with matte black PLA, which is stronger than PLA. For the upper part, the slightly softer and UV-resistant PETG filament with the color galaxy black is used.
The case kit includes a connector to connect and sync the Pocket Operators in the case.
Note: To insert the pocket operator into the housing, the PO hangers must be completely removed. Residue may need to be carefully sanded off to ensure the top of the Pocket Operator is smooth and straight. Never force the Pocket Operator into the case!
Instructions: You can find video instructions for using the keys and the Pocket Operator in the gallery. The procedure is identical for almost all spillerphoto 3D housings. With the Monolith DUO, the two pocket operators only have to be connected to the sync connector before they are used. Then carefully insert the two POs into the housing from the front. Please make sure that the previously inserted 3D printed buttons do not jump out during insertion. Then close the cover, screw and mount the encoder caps.
Basically, many color combinations of housing and keys are possible. Please inquire accordingly!
The default color configuration (as shown in the photos) for this case is
32 sequencer keys: black - rubberized (TPU filament)
6 side buttons: whot - hard (PLA filament)
2 play buttons: red - hard (PLA filament)
Case color: Galaxy black
Encoder caps: black
Monolith DUO - Housing for 2 TE Pocket Operators includes
Top of case
Lower part of the case
4 screws
40 keys
4 silicone feet
4 encoder caps
1 sync connector
Delivery time:
The article will be made after receipt of order.
The delivery times (incl. 5 days processing time) are:
-
Germany: 7 working days
- Europe: 10 working days
- World: 14 working days
The pocket operator shown in the photos is not included.
