![DSQ-1 PLUS - Korg SQ-1 Sequencer Eurorack Mounting Frame with 4 HP Module space - spillerphoto](http://spillerphoto.com/cdn/shop/articles/dsq-1-plus-korg-sq-1-sequencer-eurorack-mounting-frame-with-4-hp-module-space-spm3x-com-spillerphoto-and-music_ef9f1d05-0713-411d-8cfc-52a226e3cd82.jpg?v=1721253176&width=1100)
DSQ-1 PLUS - Korg SQ-1 Sequencer Eurorack Mounting Frame with 4 HP Module space
The DSQ-1+ is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. While the DSQ-1 mounting frame offers bigger lettering, the DSQ-1+ uses this area to provide space for a 4HP Eurorack Module.
For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required.
Easy assembly
- Remove the batteries
- Loosen the thin plastic film on one side which is holding the battery holder in place
- Unscrew the 4 front screws
- Remove the back and pull the battery holder through the back, that the back can be put aside
- Slide the mounting frame in
- Use the 4 screws from the front to fix the mounting frame
![SQ-1 Plus Eurorack Mounting Frame for Korg SQ-1](https://cdn.shopify.com/s/files/1/0606/8708/9815/t/2/assets/L1000255-1024x683.jpg?v=1647570333)
![SQ-1 Plus Eurorack Mounting Frame for Korg SQ-1](https://cdn.shopify.com/s/files/1/0606/8708/9815/t/2/assets/L1000258-1024x683.jpg?v=1647570335)
![SQ-1 Plus Eurorack Mounting Frame for Korg SQ-1](https://cdn.shopify.com/s/files/1/0606/8708/9815/t/2/assets/L1000260-1024x683.jpg?v=1647570337)
Powering the SQ-1 can either be done by batteries, via USB with an angled USB cable or with the 12V to USB power converter.