D-Caps for Behringer Neutron STL download - spillerphoto

D-Caps for Behringer Neutron STL download


  • Additional space for Eurorack modules
  • DCAPS with 65 mm maximum module installation depth
  • Each DCAP with hole for external wiring and bore holes for mounting on other modular systems
  • Lifts the Behringer metal case over the cable connections of the Keystep.

The Installation of the DCAPS for the Behringer Neutron

The DCAPS for the Behringer Neutron case are easy to install and the installation process is straight forward. Only a Phillips screwdriver is required for the assembly. Just remove the 4 screws on each side wall of the original metal housing and replace the fake wood side walls with the DCAPS. The metal plate as well as the screws of the original Behringer housing are re-used for mounting the DCAPS.

Back to blog

Leave a comment

Please note that comments must be approved before publication.