DSQ-1 - Korg SQ-1 Sequencer Eurorack Mounting Frame

The DSQ-1 is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer.

For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required.

Easy assembly

1. Remove the batteries
2. Loosen the thin plastic film on one side which is holding the battery holder in place
3. Unscrew the 4 front screws
4. Remove the back and pull the battery holder through the back, that the back can be put aside
5. Slide the mounting frame in
6. Use the 4 screws from the front to fix the mounting frame