70s Monolith - Housing for 3 Pocket Operators
The housing is available in 3 versions
Version - Monolith, printed with PLA and PETG
The bottom part of the case is printed with matte black PLA, which has higher strength than PLA. For the upper part, the slightly softer and UV-resistant PETG filament is used, with the color Galaxy Black.
Note: To insert the pocket operator into the housing, the PO hangers must be completely removed. Residue may need to be carefully sanded off to ensure the top of the Pocket Operator is smooth and straight. Never force the Pocket Operator into the case!
Instructions: You can find video instructions for inserting the keys and the pocket operator in the gallery. The procedure is identical for almost all spillerphoto 3D housings. With the Monolith DUO, the three pocket operators only have to be connected to the sync connector before they can be used. Then carefully insert the POs into the housing from the front. Please make sure that the previously inserted 3D printed buttons do not jump out during insertion. Then close the cover, screw and mount the encoder caps.
Basically, many color combinations of housing and keys are possible. Please inquire accordingly!
Scope of delivery
Pocket Operator housing
2 sync/audio connectors
3 x 16 sequencer keys
3 x 7 Side Buttons
6 encoder caps
4 silicon feet
The delivery time is 14 days because the item is manufactured after the order has been received.
The Teenage Engineering Pocket Operators shown are not part of the offer!