70s Gray - Case for 3 Pocket Operators

3D printed housing for 3 pocket operators including 2 sync/audio connectors. Like all cases, the case is made with high quality Extrudr filament on Prusa i3 3D printer printed.

The housing is available in 3 versions

Version 2 - 70s Grey, printed with PLA

Deep black base plate, gray housing with white/grey contrasting top plate. The LCD openings are covered with acrylic glass.

Note: To insert the pocket operator into the housing, the PO hangers must be completely removed. Residue may need to be carefully sanded off to ensure the top of the Pocket Operator is smooth and straight. Never force the Pocket Operator into the case!

Instructions: You can find video instructions for inserting the keys and the Pocket Operator in the gallery. The procedure is identical for almost all spillerphoto 3D housings. With the Monolith DUO, the three pocket operators only have to be connected to the sync connector before they can be used. Then carefully insert the POs into the housing from the front. Please make sure that the previously inserted 3D printed buttons do not jump out during insertion. Then close the cover, screw and mount the encoder caps.

Basically, many color combinations of housing and keys are possible. Please inquire accordingly!

Scope of delivery

Pocket Operator Case

2 sync/audio connectors

3 x 16 sequencer keys

3 x 7 Side Buttons

6 encoder caps

4 silicone feet

Delivery time

The delivery time is 14 days because the item is manufactured after the order has been received.

The Teenage Engineering Pocket Operators shown are not part of the offer!