DSQ-1 - Eurorack mounting frame for Korg SQ-1 sequencer

The DSQ-1 is a 3D printed Eurorack mounting frame for the Korg SQ-1 sequencer.

Mounting the mounting frame requires removing the back of the original SQ-1 sequencer case.

Easy assembly

1. Remove the batteries
   
2. Peel off the thin plastic sheet on one side holding the battery holder in place
   
3. Unscrew the 4 front screws
   
4. Remove the back and pull the battery holder through the back so the back can be set aside
   
5. Slide the mounting frame in
   
6. Fix the mounting frame with the 4 screws from the front
   
7. Remove the batteries
   
8. Peel off the thin plastic sheet on one side holding the battery holder in place
   
9. Unscrew the 4 front screws
   
10. Remove the back and pull the battery holder through the back so the back can be set aside
    
11. Slide the mounting frame in
    
12. Fix the mounting frame with the 4 screws from the front

The SQ-1 can be powered either by batteries or by USB using an angled USB cable.

Scope of delivery

1 pc. 3D printed PLA Eurorack installation frame.

Delivery time

The article is made after receipt of order.
The delivery times (including 5 days processing time) are:
Germany: 7 working days
Europe: 10 working days
World: 14 working days

The pictured Korg SQ-1 sequencer as well as screws, nuts and battery holders are not part of the offer.