DSQ-1 PLUS - Korg SQ-1 Eurorack mounting frame

The DSQ-1+ is a 3D printed Eurorack mounting frame for the Korg SQ-1 sequencer. While the DSQ-1 mounting frame offers larger lettering, the DSQ-1+ uses this area to make room for a 4HP Eurorack module.

Installing the mounting frame requires removing the back of the original SQ-1 sequencer case.

Easy assembly

Remove the batteries

Peel the thin plastic sheet on one side holding the battery holder in place

Unscrew the 4 front screws

Remove the back and pull the battery holder through the back so the back can be set aside

Slide the mounting frame in

Fix the mounting frame with the 4 screws from the front

The SQ-1 can be powered either by batteries or by USB using an angled USB cable.

Scope of delivery

1 pc. 3D printed PLA mounting frame + 1 blank panel.

Delivery time

The delivery time is 14 days because the item is manufactured after the order has been received.

The pictured Korg SQ-1 sequencer as well as screws, nuts and battery holders are not part of the offer.