Basket

Basket

The SP1 Eurorack Case – a modular 3D printed Eurorack Case

The SP1 Eurorack Case - a modular Eurorack Case
(Last Updated On: 07/12/2020)

About The SP1 Eurorack Modular Case

Why to be limited to modules when it comes to a flexible modular system? Why not also to be flexible with the casing? The SP1 growths with your needs. From the small to-go modular drum synthesiser setup up to the fully fledged modular home system…or even combine a stationary system with a mobile system. The SP1 can be extended vertical as well as horizontal.

Features of the SP1 Eurorack Modular Case

  • Flexible modular case design
  • 3D printed and use of standard Eurorack thread profiles
  • Horizontal Extendable
  • Vertical Extendable
  • Build in cable shaft on the back (shaft is accessible with the modules SP1H10CC or SP1 H10DCC)
  • Light Weight
  • Good Cost/Performance Ratio
  • Horizontal or angled desktop position*
  • 70mm module depth

Current available SP1 Eurorack case modules:

  • SP1H10 – Standard 10 HP 3U Eurorack Module
  • SP1H35 – Standard 35 HP 3U Eurorack Module (only STL file download)
  • SP1H10VC – Standard 10 HP 3U Eurorack Module with vertical connection and cable holes
  • SP1H10HC  – Standard 10 HP 3U Eurorack Module for vertical connection and back pillar
  • SP1H10RC – 10 HP 3U Eurorack Module with right cover
  • SP1H10LC – 10 HP 3U Eurorack Module with left cover
  • SP1H25GM – 25 HP 3 U Eurorack Module with Grip
  • SP1H10CC – Standard 10 HP 3U Eurorack Module with cable opening into the cable shaft
  • SP1H10DCC – Standard 10 HP 3U Eurorack Module with double cable opening
  • SP1Cap10 – 10 HP front cap
  • SP1Cap25 – 25 HP front cap
  • SP1CapRC – 10 HP front cap with right cover
  • SP1CapLC – 10 HP front cap with left cover

Planned case modules:

  • SP1SQ1 – Eurorack Module for Korg™ SQ1
  • Sp1TEO – Eurorack Module for Teenage Engineering™ Operator Series
  • SP1H10FL – Standard 10 HP 3U Eurorack Module with flat back for horizontal positioning
  • SP1H10VCFL – Standard 10 HP 3U Eurorack Module with vertical connection and cable holes with flat back for horizontal positioning
  • SP1H10RCFL – 10 HP 3U Eurorack Module with right cover with flat back for horizontal positioning
  • SP1H10LCFL – 10 HP 3U Eurorack Module with left cover with flat back for horizontal positioning
  • SP1H10CCFL – Standard 10 HP 3U Eurorack Module with cable opening into the cable shaft with flat back for horizontal positioning
  • SP1H10DCCFL – Standard 10 HP 3U Eurorack Module with double cable opening with flat back for horizontal positioning

Available as STL Files for your own Eurorack prints.

*desktop position for one horizontal row systems only

SP1 Print Recommendation
SP1 Print Recommendation
The Sp1 Eurorack is a flexible modular casing system and can be extended vertically and horizontally. The SP1 Eurorack growths with your needs.

http://spillerphoto.com/product/sp1h10-standard-10-hp-3u-eurorack-module/

http://spillerphoto.com/product/sp1h10dcc-standard-10-hp-3u-eurorack-module-with-double-cable-opening/

http://spillerphoto.com/product/sp1caplc-10-hp-front-cap-with-left-side-wall/

http://spillerphoto.com/product/sp1caprc-10-hp-front-cover-right-side-wall/

http://spillerphoto.com/product/sp1cap10_10_hp_front_cap/

http://spillerphoto.com/product/sp1h10hc-stl-file-download-standard-10-hp-3u-eurorack-module-for-vertical-connection-and-back-pilar/

http://spillerphoto.com/product/sp1h10-standard-10-hp-3u-eurorack-module-cable-opening/

http://spillerphoto.com/product/sp1h10lc-10-hp-3u-eurorack-module-with-left-endpiece/

 

No Replies on

The SP1 Eurorack Case – a modular 3D printed Eurorack Case

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.