70s Monolith - Case for 3 Pocket Operators

3D printed case for 3 pocket operators including 2 sync/audio connectors. Like all cases, the case is made with high quality Prusament and Extrudr filament on Prusa i3 3D printer printed.

monolith

The lower part of the case is printed with matt black PLA, which has a higher strength than PLA. For the upper part, the slightly softer and UV-resistant PETG filament is used, with the color Galaxy Black.

Note

To insert the pocket operator into the case, the PO hangers must be completely removed. Residue may need to be carefully sanded off to ensure the top of the Pocket Operator is smooth and straight. Never force the Pocket Operator into the case!

Instructions

See the gallery for video instructions on how to use the buttons and the Pocket Operator. The procedure is identical for almost all spillerphoto 3D housings. With the Monolith DUO, the three pocket operators only have to be connected to the sync connector before they can be used. Then carefully insert the POs into the housing from the front. Please make sure that the previously inserted 3D printed buttons do not jump out during insertion. Then close the cover, screw and mount the encoder caps.

Basically, many color combinations of housing and keys are possible. Please inquire accordingly!

Scope of delivery

Pocket Operator case

2 sync/audio connectors

3 x 16 sequencer keys

3 x 7 Side Buttons

6 encoder caps

4 silicon feet

Delivery time:

The article will be made after receipt of order.

The delivery times (incl. 5 days processing time) are:

• Germany: 7 working days
  
• Europe: 10 working days
• World: 14 working days

The Teenage Engineering Pocket Operators shown are not part of the offer!