SPM - Spillerphoto & Music
SPM Pro Case KEYSTEP for Behringer Desktop Synthesizer Pro-800, Cat, K2, Model D, Neutron, Pro-1 and WASP Deluxe
SPM Pro Case KEYSTEP for Behringer Desktop Synthesizer Pro-800, Cat, K2, Model D, Neutron, Pro-1 and WASP Deluxe
Availability for pickups could not be loaded
3D printed synthesizer case for the Arturia KeyStep midi keyboard with the Behringer synthesizers in Eurorack format Pro-800, Cat, K2, Model D, Neutron, Pro-1 and WASP Deluxe.
The cost-effective housing impresses with its excellent print quality and greatly enhances the already fantastic small desktop synthesizers. It can be used flexibly and can also be used as a Eurorack with the empty cases of the synthesizers listed above.
synthesizer
The case comes with a synthesizer holder as standard. However, the housing can be expanded with additional brackets. It should be noted that the Behringer devices have two different widths and the holder must be selected according to the width (424 mm or 374 mm).
424mm:
- Pro-800
- K2
- neutron
- Pro-1
- Taurus
374mm:
- Cat
- Model D
- WASP Deluxe
The basic housing is always the same and can be expanded with both types of brackets.
Maximum number of synthesizers
We currently recommend not installing more than a maximum of 3 devices in one housing. More devices can be installed in one housing, but the housing must then be leaned against a wall or other solid object in order to avoid any tipping and to relieve the load on the supports.
scope of delivery
The housing consists of a base plate, 2 side panels and 2 synthesizer holders that are attached to the base plate with hinges. Silicone feet on the bottom ensure a secure stand on the table. The desired synthesizer tilt angle can be locked using two stands on the back.
Quality
Only high-quality NX 2 PLA from extrudr from Austria is used as printing material. Printing all parts of the base case takes approximately 36 hours.
All screws for fastening in plastic are made with ruthex melt threads. A total of 16 melting threads are installed in the base housing alone.
Tool
The base case with a synthesizer holder comes unassembled. The following tools are required for assembly and can be ordered optionally:
2.5 mm Allen key • 3 mm Allen key • Phillips screwdriver
delivery time
The item will be made after receipt of the order. The delivery times (including 5 days processing time) are:
Germany: 7 working days
Europe: 10 working days
World: 14 working days
The synthesizers and keyboard shown in the photos are not part of this offer.


