SPM - Spillerphoto & Music

SPM Pro Case Swing for Behringer Desktop Synthesizers Pro-800, Cat, K2, Model D, Neutron, Pro-1 and WASP Deluxe

Name: SPM Pro Case Swing for Behringer Desktop Synthesizers Pro-800, Cat, K2, Model D, Neutron, Pro-1 and WASP Deluxe
Brand: SPM - Spillerphoto & Music
Price: 149.0 USD
Availability: InStock

$149.00

Sale Sold out

VAT included. Shipping will be calculated at checkout

Number

3D printed synthesizer case for the Behringer Swing Keyboard with the Behringer synthesizers in Eurorack format Pro-800, Cat, K2, Model D, Neutron, Pro-1 and WASP Deluxe.

The inexpensive housing convinces with excellent print quality and upgrades the already fantastic small desktop synthesizer enormously. It can be used flexibly and can also be used as a Eurorack with the empty cases of the synthesizers listed above.

synthesizer

By default, the case comes with a synthesizer mount. However, the housing can be expanded with additional brackets. It should be noted here that the Behringer devices have two different widths and the bracket must be selected according to the width (424 mm or 374 mm).

Pro-800 (424mm wide) • Cat (374mm wide) • K2 (424mm wide) • Model D (374mm wide) • Neutron (424mm wide) • Pro-1 (424mm wide) • WASP Deluxe (374mm wide)

The basic housing is always the same and can be expanded with both bracket types.

Maximum number of synthesizers

We currently recommend installing no more than a maximum of 3 devices in one housing. More devices can be installed in one housing, but then the housing must be leaned backwards against a wall or other solid object to avoid tipping and to relieve the supports.

Scope of delivery

The housing consists of a base plate, 2 side panels and 2 synthesizer brackets that are attached to the base plate with hinges. Silicone feet on the underside ensure a secure stand on the table. The desired synthesizer tilt angle can be locked on the back with two stands.

Quality

Only high-quality NX 2 PLA from extrudr from Austria is used as printing material. It takes approximately 36 hours to print all parts of the base chassis.

All screws for fastening in the plastic are designed with ruthex melt threads. A total of 16 fusible threads are installed in the basic housing alone.