DSQ-1+ Eurorack mounting frame for Korg SQ-1 + 18 button upgrade

The Korg SQ-1 Eurorack Conversion Set includes:

DSQ-1 Eurorack mounting frame + 18 knobs upgrade

DSQ-1+

The DSQ-1+ is a 3D printed Eurorack mounting frame for the Korg SQ-1 sequencer.

18 Buttons Upgrade

The new buttons are larger than the original buttons and made from Prusament PLA. Due to the size and improved profile, they offer better handling than the small original buttons. The center of the buttons is hollow (colored buttons), which allows the red light of the step sequencer to shine through. The transparent buttons are fully enclosed and have no hole in the middle.

Easy assembly of the DSQ-1+

• Remove the batteries
  
• Remove the thin plastic film on one side that holds the battery holder
  
• Unscrew the 4 front screws
  
• Remove the back and pull the battery holder through the back so that the back can be put aside
  
• Slide the mounting frame in
  
• Fasten the mounting frame with the 4 screws from the front
  

• Remove the batteries
  
• Remove the thin plastic film on one side that holds the battery holder in place
  
• Loosen the 4 front screws
  
• Remove the back and pull the battery holder through the back so that the back can be put aside
  
• Slide the mounting frame in
  
• Fasten the mounting frame with the 4 screws from the front
  

The SQ-1 can be powered either by batteries or via USB with an angled USB cable.

delivery time

The delivery time is 14 days as the item is manufactured after receipt of the order.